★ 4.7 Google rating · Serving Greater Vancouver since 1999
ServicesBrandsRebates ReviewsAboutContact 📞 Call (604) 473-9690

Free Furnace Buying Consultation in Delta

Furnace

Free Furnace Buying Consultation in Delta
Home › Free Furnace Buying Consultation in Delta

Free Furnace Buying Consultation in Delta

Quick answer

A furnace buying consultation in Delta is an in-home visit where a BC Wide licensed gas fitter measures your home’s heat loss and checks the gas supply, venting route, ductwork, condensate drainage and mechanical space. Then we explain which gas furnace size, efficiency tier and staging suits the house. The in-home estimate for a replacement is free. You get a written quote that lists the scope, the permit and the warranty terms, and nothing is installed until you approve it. Call (604) 473-9690. Same-day where we can.

Key takeaways

  • A proper furnace consultation starts with a room-by-room heat-loss calculation, not the size of the old furnace.
  • Efficiency tier decides venting: high-efficiency condensing furnaces vent through plastic pipe and need a condensate drain; mid-efficiency units use a chimney or metal vent.
  • Single-stage, two-stage and modulating furnaces differ in comfort, noise and how evenly they heat, and the right choice depends on your ductwork.
  • Delta homes, from North Delta split-levels to Ladner and Tsawwassen ranchers, often have crawlspace or utility-room installs where space, drainage and vent routing drive the decision.
  • BC Wide is an independent TSBC-licensed contractor that installs and services several brands, so the recommendation is about your house, not a single product line.
  • The consultation is free and you leave with a written quote; nothing is priced over the phone without seeing the home.

A free furnace buying consultation in Delta is a site visit where a licensed gas technician measures your home’s actual heating need, looks at your ductwork, venting path, gas supply and mechanical space, and then recommends the size, efficiency tier and staging of gas furnace that fits the house. You get a plain explanation of the options and a written quote, with no obligation to buy. At BC Wide Home Services we have done this for Delta homeowners since 1999 as an independent TSBC-licensed contractor, so we are not steering you toward one brand. The goal is simple: buy the right furnace once, sized and installed for the way your home actually loses heat.

What happens during a free furnace consultation in Delta?

The visit is a working inspection, not a sales pitch. A technician walks the house, measures rooms, notes window area and orientation, checks the attic and crawlspace insulation where accessible, and asks how the home feels in winter: which rooms run cold, where drafts come from, and whether anyone upstairs complains about stuffiness while the basement stays chilly.

Then the mechanical side gets a close look. That means the existing furnace and its nameplate, the supply and return ductwork, the gas meter and piping, the chimney or vent, the electrical supply to the furnace, and the floor drain or condensate route. Each of these can quietly rule an option in or out.

Finally we sit down with you and explain what we found, what we would install and why, and what the alternatives are. You receive a written quote afterward. If you want to compare it with another contractor’s proposal, that is reasonable and we will explain any differences in the scope of work.

  • Heat-loss measurements and a conversation about comfort problems
  • Inspection of ductwork, returns, filter location and airflow
  • Gas supply, meter location and piping route check
  • Venting path assessment: chimney, side wall or roof
  • Mechanical room space, clearances and service access
  • Written, itemized quote with no obligation

How do you size a gas furnace correctly?

Correct sizing comes from a heat-loss calculation, commonly done to a recognized method such as the one set out in the Canadian residential standard for heating and cooling system design. It adds up how much heat escapes through walls, windows, ceilings, floors and air leakage on a cold design day for our region, room by room. The furnace output should match that number with a sensible margin, not exceed it by a wide gap.

Many furnaces in Metro Vancouver were oversized when they went in, and many homes have since had new windows, added insulation or a sealed attic. Copying the old furnace’s rating often means buying too much furnace again. An oversized furnace heats the house in short bursts, cycles on and off frequently, wears its ignition and controls faster, and leaves rooms far from the thermostat uneven.

Sizing also has an airflow side. The furnace blower has to move enough air through your existing ducts to carry its heat without running hot or noisy. If the ducts are undersized for the furnace you want, the consultation should say so and explain whether a return upgrade, a different furnace size or a modulating model solves it.

Which efficiency tier makes sense for my home?

Gas furnaces fall into two broad tiers. Mid-efficiency furnaces vent hot flue gas up a lined chimney or metal vent and do not produce significant condensate. High-efficiency condensing furnaces extract so much heat that water condenses out of the flue gas; they vent through plastic pipe, draw combustion air from outside in most installations, and need a drain for the condensate.

AFUE, the annual fuel utilization efficiency rating, describes how much of the gas you buy becomes useful heat over a season. We will explain what the rating means for any model we propose and show you the manufacturer-published figure, but the tier decision is usually made by the house as much as by the rating. Current Canadian efficiency regulations also shape what can be installed, and your installer should confirm which tiers are allowed for a replacement in your situation.

In most Delta homes a condensing furnace is the practical choice, because it frees up the old chimney and can vent out a side wall. Where side-wall venting is blocked by neighbouring windows, property lines or a deck, the vent route becomes part of the consultation.

Decision factorMid-efficiency furnaceHigh-efficiency condensing furnace
VentingLined chimney or metal B-ventPlastic pipe through side wall or roof
Condensate drainNot normally neededRequired, with a route to a drain or a condensate pump
Combustion airUsually from the roomUsually piped from outdoors in a sealed system
Existing chimneyRelies on it, may need a linerCan retire it; a water heater left on it may need a liner
Operating costHigher gas use for the same heatLower gas use for the same heat
Install complexitySimpler where the chimney is soundDepends on vent path and drain location

Single-stage, two-stage or modulating: what is the difference?

A single-stage furnace has one burner setting: fully on or off. It is simple and robust, but on the many mild days of a coastal winter it overshoots, then shuts down, then starts again. A two-stage furnace has a low fire and a high fire. It runs most of the time on low, which gives longer, quieter cycles and more even temperatures, and steps up only on the coldest days.

A modulating furnace adjusts its burner in small steps across a wide range, matching output closely to the heat the house is losing at that moment. Paired with a variable-speed blower, it runs long and gentle, which evens out temperature between floors and reduces the blast of warm air people notice with single-stage units.

The right choice depends on the ductwork and on what bothers you. A tight, well-ducted home gains a lot from modulation. A home with restrictive ducts may benefit from a variable-speed blower even more than from extra burner stages. We explain the trade-offs without ranking brands, because good equipment from several manufacturers can do the job; the installation and setup matter more than the logo.

What makes furnace choice different in Delta?

Delta sits on the Fraser River delta, and much of Ladner, Tsawwassen and East Delta is low-lying ground with a high water table. Homes here are commonly slab-on-grade or built over a crawlspace rather than a full basement, so furnaces often sit in a utility closet, a garage, or a crawlspace. That affects the physical size of unit that fits, the direction of airflow the furnace must be configured for, and where the condensate can drain. A crawlspace install may need a condensate pump and careful protection against freezing and moisture.

North Delta has more split-levels and houses with basements built from the 1960s through the 1980s, many still on their original ductwork. Those duct systems were often designed for a large single-stage furnace, and return air paths can be undersized. Tsawwassen and the Boundary Bay side see salty marine air, which is harder on outdoor vent terminations and on the outdoor unit of a heat pump if one is added to the furnace later.

Our climate is mild and wet, with long shoulder seasons and relatively few very cold days. That favours equipment that runs efficiently at low output, which is why staging and modulation deserve attention here. It also makes a gas furnace paired with a heat pump worth discussing: the heat pump handles the mild months and the furnace takes over in cold snaps. We will cover that option if it fits your home, electrical service and budget.

Gas work in Delta needs a permit from the authority having jurisdiction, and the installing contractor pulls it. Townhomes and strata properties may also need strata approval for vent terminations and exterior penetrations, so bring the bylaws to the consultation if you live in one.

What should I have ready before the consultation?

None of this is mandatory. It simply helps the technician recommend something that fits how you live, and it prevents surprises such as an orphaned water heater on a chimney that no longer has a furnace venting into it.

  • Recent gas bills, if you have them, to show seasonal use
  • A list of rooms that run too hot, too cold or drafty
  • Any renovations since the current furnace went in: windows, insulation, additions, a finished basement
  • Whether you want central air conditioning or a heat pump now or later, since that changes the blower and coil choice
  • Your water heater type and whether it shares the chimney with the furnace
  • Strata bylaws or a contact for the strata council if you live in a townhome

What will the quote include, and how is cost explained?

A good quote lists the furnace model, the scope of work and what is excluded. Typical line items include removal of the old unit, venting materials, condensate drain or pump, gas piping changes, duct transitions, a new filter cabinet, the thermostat, the gas permit and final startup with combustion testing.

We do not quote a furnace over the phone, because the variables that drive cost are the ones only a site visit reveals: vent route length and difficulty, whether the chimney needs a liner for the water heater, crawlspace access, electrical work, and ductwork corrections. The furnace itself is only one part of the total. A modulating furnace with a variable-speed blower is generally a larger investment than a single-stage unit, and we will explain whether that difference earns its keep in your particular house. Ask for any rebate or financing information in writing at the time of the quote, since programs change.

When should I call a licensed technician instead of waiting?

Homeowners can safely change filters, keep supply and return registers clear, check that the thermostat has power and is set correctly, and keep the area around the furnace clear of storage. Everything involving the gas valve, burners, flue, gas piping, venting or internal wiring is licensed work in BC and must be done by a TSBC-licensed gas fitter.

Call for a consultation sooner rather than later if your furnace is older and needing repairs more often, if the heat exchanger has been flagged by a technician, if you notice soot, a yellow or lazy flame, rust inside the cabinet, water pooling under the unit, or if rooms have become noticeably uneven. Planning a replacement before it fails lets you choose calmly instead of accepting whatever is in stock on a cold night.

Gas & carbon-monoxide safety: Gas and carbon-monoxide safety: a gas furnace burns fuel and must vent its combustion products outdoors. Install carbon-monoxide alarms on every level of the home and near sleeping areas, and test them regularly. If you smell gas, leave the house immediately, do not operate switches or appliances, and call your gas utility’s emergency line from outside. If a CO alarm sounds or anyone has headaches, dizziness or nausea that ease when they leave the house, get everyone outside and call 911. Never block a furnace vent termination, and never attempt gas, venting or burner work yourself; in BC that work is restricted to licensed gas fitters working under a permit.

Frequently asked questions

Is the furnace buying consultation really free?

Yes. The site visit, the explanation of options and the written quote cost you nothing and carry no obligation. You can take the quote away, compare it and call us back when you are ready.

Do you serve all of Delta?

Yes. We work across North Delta, Ladner, Tsawwassen and East Delta, along with the rest of Metro Vancouver. Call (604) 473-9690 to book a time that suits you.

Can you just replace my furnace with the same size?

We can, but we recommend against it without a heat-loss calculation. Many older furnaces were oversized, and homes change over time with new windows and insulation, so the right size today is often different from the original.

Which furnace brand do you recommend?

We are an independent contractor that installs and services several brands, not a factory-authorized dealer for one. We recommend a size, efficiency tier and staging type first, then show you suitable models, because installation quality and correct setup affect performance more than the badge.

Can a high-efficiency furnace go in my crawlspace?

Often it can, but it depends on clearances, access for service, the airflow configuration the unit supports, and how the condensate will drain. Crawlspace installs in Delta frequently need a condensate pump and protection from moisture, which we check during the visit.

Should I add a heat pump at the same time as a new furnace?

It is worth discussing, especially in our mild coastal climate where a heat pump can handle much of the season and the gas furnace covers cold snaps. Whether it makes sense depends on your electrical service, outdoor space and budget, and we will lay out both paths in the quote.

Do I need a permit to replace a gas furnace in Delta?

Yes. Gas appliance installation requires a permit, and your licensed contractor pulls it and arranges any required inspection. Strata properties may also need council approval for exterior vent terminations.

BC Wide Home Services — Lower Mainland home-comfort specialists since 1999

Technical Safety BC Licensed Gas Contractor (LGA0090068) · Class B Gas Licence (CGA0028029) · Red Seal technicians · Evening and weekend calls · Diagnostic service calls $189.00 · Free in-home estimates on replacements (the $189.00 is waived if you replace with us). Call 604-473-9690 or book a free replacement estimate.

Furnace Buying Consultation Delta: what we check first

The first part of a furnace buying consultation in Delta decides most of the job. Before we talk about brands or efficiency, we look at what limits the furnace that can physically and legally go into your house. If the venting route, gas supply or drainage cannot support a particular furnace, the best model on paper is the wrong recommendation.

The table below shows the order we usually work in on site and why each item can change the final quote.

What we checkWhat we are looking atWhy it changes the quote
Existing furnace and its labelFuel type, rated input, age from the data plate, vent type, signs of overheating or rustShows what the system was designed around. We never size the new furnace from the old one alone
Venting pathA chimney or metal vent for a mid-efficiency furnace, or a route to an outside wall for the plastic vent pipe of a condensing furnaceVent routing and the required clearances from windows, doors and property lines often decide which furnace fits
Condensate drainageWhere a high-efficiency furnace can drain, and whether it needs a condensate pumpA crawlspace or utility room with no drain nearby adds work, and that work belongs on the quote
Gas supplyMeter capacity, pipe size and run length from the meter, and the other gas appliances on the same lineAn undersized line can starve a new furnace or a future water heater, so any piping changes must be quoted
Ductwork and returnsDuct sizes, the return air path, leaks, crushed or disconnected runs, and where the filter sitsDucts that are too small for the airflow make any furnace noisy and heat the house unevenly
Mechanical space and accessClearances, crawlspace height, closet or attic access, and combustion airTight spaces limit the cabinet size and orientation, and they affect labour
Electrical and controlsA dedicated furnace circuit, the service switch and the thermostat wiringA two-stage or modulating furnace may need a compatible thermostat and extra wires
Safety itemsWhether a carbon monoxide alarm is present, the condition of the vent, and any visible damage on the old unitWe note anything unsafe in writing, whether or not you buy

What problems make Delta homeowners book a furnace consultation?

Most people do not book a consultation because they want a new furnace. They book because something about the old one has started to bother them. These are the reasons we hear most often from Delta homeowners when they call:

  • The furnace keeps needing repairs, and I am tired of paying for parts on an old unit.
  • Some rooms are always cold, especially upstairs or over the garage.
  • It is loud. It bangs when it starts, the fan whines or the ducts rattle.
  • The furnace runs constantly and the house still never feels warm.
  • The gas bill keeps climbing, and I want to know whether a newer furnace would help.
  • A technician told me the heat exchanger or another major part is a concern.
  • We are renovating, finishing the basement or adding a suite, and we need more heat.
  • We want to add air conditioning or a heat pump and need to know whether the furnace can work with it.
  • We just bought the house and nobody knows how old the furnace is.

How does a furnace buying consultation in Delta work, step by step?

The visit follows the same sequence every time so nothing gets skipped. You can watch most of it, and we encourage you to ask questions as we go.

Steps 1 to 6 make up the free in-home estimate for a replacement. Nothing is installed or charged until you approve the written quote.

  • Step 1, booking: call (604) 473-9690 and tell us the type of house, where the furnace is and what is bothering you. We book a visit time that suits you, same-day where we can.
  • Step 2, walk-through: we ask how each room heats, which rooms are uncomfortable, and what you plan to change in the house over the next few years.
  • Step 3, measurements: we measure rooms, windows and exterior walls and note the insulation we can see. That way the heat-loss calculation reflects your house, not a rule of thumb.
  • Step 4, equipment and venting: we look over the existing furnace, vent, gas piping, condensate options, ductwork and electrical supply, as set out in the table above.
  • Step 5, options: we lay out the realistic choices, usually different efficiency tiers and staging levels. We also tell you whether pairing a heat pump with the furnace is worth considering for your house.
  • Step 6, written quote: you get a written quote that names the equipment, the full scope, the permit and the warranty terms. Take your time to compare and ask follow-up questions.
  • Step 7, installation: if you go ahead, we pull the gas permit, book the installation and confirm what will happen on the day.

Furnace consultation in North Delta, Sunshine Hills, Scottsdale, Annieville, Ladner and Tsawwassen

Delta is really three communities with different housing patterns, and the consultation adapts to each one. The notes below are general patterns we look for, not rules. Every house is measured on its own.

North Delta and Annieville: North Delta has a broad mix of split-levels, basement-entry homes and newer infill houses. Annieville, on the slopes near the river, has older homes alongside rebuilt lots. In homes like these the furnace is often in a lower-level utility room with long duct runs up to the bedrooms. That is why uneven heat between floors is a common complaint. Return air to the upper floor is often undersized, and fixing it can matter as much as the furnace itself.

Sunshine Hills and Scottsdale: Sunshine Hills is mostly established single-family housing on larger lots. Scottsdale mixes older detached homes with townhouses and newer builds. Many of these homes have been renovated or added onto over the years, so we check whether the ductwork was properly extended or just tapped into the nearest run. Additions and finished basements are a common reason the old furnace size no longer matches the house.

Ladner: Ladner sits low and close to the water, and many homes are ranchers or have the furnace in a crawlspace. Damp crawlspaces shorten equipment life, damage ducts and limit where a condensing furnace can drain. We look closely at the duct insulation and connections under the house, and at whether a condensate pump is needed.

Tsawwassen: Tsawwassen has established family homes alongside newer townhouse and strata developments. Wind off the water can add to heat loss on exposed homes, and the room-by-room calculation picks that up. In a strata unit, new vent locations and any changes to exterior walls may need strata approval before work starts, so we flag that early.

What should your furnace quote and handover include in Delta?

A furnace replacement is only as good as the paperwork behind it. Before you sign, the written quote should answer every one of these points without you having to ask.

At handover, a correct installation looks like this. The furnace is level and secure. On a condensing furnace, the vent pipe is properly supported and slopes back toward the furnace. The condensate line drains cleanly. The gas connections have been leak-tested, and the installer has checked the temperature rise and gas pressure against the manufacturer’s installation instructions. The thermostat is set up, and you have been shown how to use it, how to change the filter, and where the service switch and gas shut-off valve are. You should receive the owner’s manual, the warranty registration details and a copy of the gas permit information.

  • The exact furnace model, its efficiency tier and staging, and the thermostat being supplied.
  • The full scope of work: removing and disposing of the old unit, new venting, gas piping changes, condensate drainage, duct changes, return-air changes and electrical connections.
  • Who pulls the gas permit, and confirmation that the work will be inspected as Technical Safety BC requires.
  • The warranty terms written on the quote: the manufacturer’s parts warranty, any labour warranty, and whether you must register the furnace to activate it. Get the terms in writing rather than relying on a verbal answer.
  • What is excluded, such as drywall patching, testing of old duct tape or insulation for hazardous materials, or an electrical panel upgrade.
  • The planned installation date and how long the heat will be off on the day.

Who does the furnace buying consultation in Delta, and which brands do you service?

BC Wide Home Services is an independent contractor licensed by Technical Safety BC under licence LGA0090068. We also hold a Class B gas licence, CGA0028029. A licensed gas fitter does every consultation, not a salesperson, and every installation is permitted and inspected. We have served Metro Vancouver from Burnaby since 1999 and have a 4.7-star rating from 181 Google reviews.

We are not a factory-authorized dealer for any manufacturer, so the recommendation follows your house, not a sales quota. Gas furnace brands we service and install include Lennox, Carrier, Trane, Goodman, Rheem, York, Amana and Daikin. We will explain the practical differences between the options we quote, but we do not rank brands as better or worse in general. Parts availability, the warranty terms on the quote and the quality of the installation matter more than the badge.

Gas and carbon monoxide safety: a furnace burns natural gas inside your home. A cracked heat exchanger, a blocked vent or a poorly connected flue can let carbon monoxide into the living space. Keep a working CO alarm on every sleeping level and near the furnace room. If you smell gas, leave the house right away. Do not use light switches or phones inside, and call your gas utility’s emergency line or 911 from outside. Homeowners can safely change filters, check thermostat settings, keep the furnace area clear and make sure outdoor vent terminals are not blocked by leaves or debris. Anything involving gas connections, burners, venting or internal wiring must be done by a licensed technician.

More questions homeowners ask

Is a furnace buying consultation in Delta free?

Yes. The in-home estimate for replacing or installing a furnace is free and comes with a written quote, with no obligation. If your furnace has broken down and needs a diagnosis first, that is a repair visit, and diagnostic service calls are $189.00. If you then go ahead with a replacement through BC Wide, the $189.00 diagnostic charge is waived.

How quickly can I get a furnace consultation near me in Delta BC?

Call (604) 473-9690 and we will book the earliest visit that works for you, same-day where we can. If you have no heat at all, say so when you call so we can treat it as a repair first. Clearing access to the furnace and listing the uncomfortable rooms ahead of time makes the visit go faster.

Do I need a permit to replace a gas furnace in Delta?

Yes. Installing a gas appliance in BC requires a gas permit, which your licensed contractor pulls before the work starts, and the installation is subject to inspection. Your written quote should say who is responsible for the permit. In a strata building, new venting through an exterior wall may also need strata approval.

Can I add a heat pump to my furnace instead of replacing everything?

Often, yes. In a dual-fuel setup, a heat pump paired with a gas furnace handles cooling and mild-weather heating, and the furnace takes over during cold snaps. Whether it suits your home depends on the furnace blower, the ductwork, the electrical panel and where the outdoor unit can go. We check all of that during the consultation.

How do I choose a furnace company in Delta?

Check that the company holds a Technical Safety BC contractor licence and that a licensed gas fitter will do the work. Ask for a written quote that lists the scope, the permit and the warranty terms, and be wary of anyone who sizes a furnace over the phone. An independent contractor can quote several brands, so the recommendation is about your house.

What can I check myself before the furnace consultation?

Write down the model and serial number from the furnace label, check whether the filter is dirty, and note which rooms run too hot or too cold. Make sure the furnace area and the outdoor vent terminals are easy to reach. Do not remove the burner or blower panels, because internal checks belong to the licensed technician.

Related BC Wide services

4.7★181+ Google reviews
27+Years serving Greater Vancouver
20+Brands serviced
$0Free written estimates on installs

Frequently asked questions

How often should a furnace be serviced?
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
How long does a furnace last in Vancouver's climate?
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Why is my furnace blowing cold air?
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
How much does a new furnace cost in Vancouver?
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
What is the most reliable furnace brand?
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
What HVAC services does BC Wide offer in Metro Vancouver?
BC Wide installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses, condos with strata systems, and small commercial buildings.
How long has BC Wide been in business?
BC Wide Heating & Air Conditioning has been serving the Greater Vancouver area since 1999. Our TSBC-licensed technicians have built a reputation as some of the most experienced furnace, boiler and heat-pump specialists in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.

What Greater Vancouver homeowners say about BC Wide

Verified Google reviews — 4.7 average across 181+ ratings
★★★★★
"Alan and Mo were amazing today. They seamlessly replaced our furnace and tankless hot water tank in record time."
Mebz Esmail
Google review · Aug 2026
★★★★★
"Alan and his colleague are very friendly and professional. They installed everything and left it clean."
Laura E. Martínez Urrutia
Google review · Aug 2026
★★★★★
"I have been using BC Wide HVAC Services for over five years for my annual maintenance."
Thor Campbell
Google review · Aug 2026
★★★★★
"Excellent service from start to finish! B.C. Wide is knowledgeable, very professional and showed up on time! I highly recommend this company."
Mark Bouffard
Google review · Aug 2026
★★★★★
"I found these guys on Google. I just moved into a place where no maintenance has been done in the last 6 years."
Thomas Lee
Google review · Aug 2026
★★★★★
"Heat pump, furnace and tankless water heater installed. Competitive price. Careful, friendly, competent, efficient installation team. Professional appearing installation. Good company, highly recommended."
Thomas T
Google review · Jul 2026

Get a Free Quote — Right From This Page

Request a Free Quote

We'll call you back fast — usually within a few hours.
✓ Thanks! We've received your request and will call you back shortly.

Get Comfortable — Talk to BC Wide Today

Free, no-obligation quotes. TSBC-licensed local technicians serving Greater Vancouver since 1999.

Licensed & Insured: Technical Safety BC Licensed Gas Contractor LGA0090068  ·  Class B Gas Licence CGA0028029  ·  Red Seal Technicians  ·  Serving Greater Vancouver since 1999
🔥 Emergency Service(604) 473-9690
📞Call NowFast Response ✉️Email UsGet A Quote