★ 4.7 Google rating · Serving Greater Vancouver since 1999
ServicesBrandsRebates ReviewsAboutContact 📞 Call (604) 473-9690

Gas Fireplace Installation in Port Moody

Gas Fireplace

BC Wide Heating & Air Conditioning — gas fireplace services in Greater Vancouver
Home › Gas Fireplace Installation in Port Moody

Gas Fireplace Installation in Port Moody

Quick answer

Gas fireplace installation in Port Moody comes down to four things decided on site: where the vent can terminate, whether the existing gas line can carry the extra load, how the unit is framed and finished, and what permits and strata approvals apply. BC Wide is a TSBC-licensed independent contractor (LGA0090068, Class B gas CGA0028029) with licensed gas fitters. We give a written quote before work, pull the gas permit, test the install and register the warranty. Call (604) 473-9690 for a free in-home estimate.

A gas fireplace adds warmth, ambiance, and reliable supplemental heat to your Port Moody home, and a properly planned installation makes all the difference in safety, efficiency, and how the finished space looks and feels. At BC Wide Heating & Air Conditioning, our licensed BC technicians have installed gas fireplaces across Greater Vancouver since 1999, and we bring that experience to every Port Moody project, from Heritage Mountain custom homes to townhomes near Newport Village and Inlet Centre. This guide walks you through the fireplace types available, what a code-compliant installation involves, and how local factors in Port Moody shape the right choice for your home.

Gas Fireplace Options for Port Moody Homes

Choosing the right gas fireplace starts with understanding the main categories and how each one fits the way you live. Port Moody homes range from older Glenayre and College Park houses to newer builds along the Inlet, so the best option depends on your existing layout, venting possibilities, and what you want the fireplace to do.

Direct-Vent Gas Fireplaces

Direct-vent units are the most common choice for both new installations and replacements. They draw combustion air from outside and vent exhaust back outside through a sealed coaxial pipe, which keeps your indoor air clean and avoids drawing heated room air up the flue. Because they vent horizontally through an exterior wall or vertically through the roof, they offer flexible placement in many Port Moody floor plans.

Gas Fireplace Inserts

If you have an existing wood-burning fireplace and masonry chimney, a gas insert slides into the firebox and converts it to clean, controllable gas heat. This is a popular upgrade in established neighbourhoods like Pleasantside and Moody Centre, where many character homes already have a masonry hearth that no longer gets used. An insert dramatically improves efficiency compared with an open wood fire that sends most of its heat up the chimney.

Built-In and Zero-Clearance Units

For renovations or new construction, a zero-clearance built-in fireplace can be framed into a wall to create a clean, modern focal point. These are well suited to open-concept living areas in newer Port Moody townhomes and detached homes, and they pair nicely with linear, contemporary designs.

During your free in-home consultation, a BC Wide technician will assess your space, venting routes, gas supply, and clearances so we can recommend options that genuinely fit your home rather than steering you toward a single product.

What a Professional Installation Involves

A gas fireplace installation is far more than setting a unit in place. It is regulated work that involves combustion, venting, and a fuel-gas connection, which is exactly why it should be carried out by a licensed BC Wide technician. Here is what a thorough, code-compliant installation typically covers.

  • Site and venting assessment: We evaluate the proposed location, wall and ceiling construction, clearances to combustibles, and the most appropriate venting path for your Port Moody home.
  • Gas line and supply review: We confirm that your gas supply can support the new appliance and that the connection meets current code. Any gas work is completed by our licensed technicians, never left to guesswork.
  • Framing and finishing coordination: For built-in units, we coordinate the rough-in so the fireplace integrates cleanly with your wall finish, mantel, and surround.
  • Venting installation: Direct-vent termination, clearances, and weather sealing are installed to manufacturer specifications and BC requirements.
  • Commissioning and safety checks: Once connected, we verify proper operation, check for leaks, confirm the unit lights and modulates correctly, and walk you through the controls.

Because this is sealed-component and fuel-gas work, attempting a DIY installation risks improper venting, gas leaks, and voided warranties. BC Wide handles every step so your fireplace is installed safely and performs the way the manufacturer intended. We hold TSBC licence LGA90068 and stand behind our workmanship.

Local Considerations That Shape Your Installation

Port Moody’s setting at the head of Burrard Inlet, its mix of housing eras, and the coastal climate all influence how a gas fireplace should be specified and installed. A little local insight goes a long way toward a fireplace you will enjoy for years.

Coastal Climate and Supplemental Heat

Port Moody’s cool, damp shoulder seasons make a gas fireplace especially valuable as zone heating. Rather than running your central system to warm the whole house on a mild but chilly evening, a fireplace lets you heat the rooms you actually use. Choosing a unit with the right heat output for the room size keeps the space comfortable without overheating it.

Venting Around Local Home Styles

Hillside homes in Heritage Woods and Heritage Mountain, multi-level layouts, and townhomes each present different venting challenges. The location of exterior walls, the roofline, and proximity to windows and property lines all affect where a vent can safely terminate. Our technicians plan venting routes that satisfy clearance rules while keeping the run as clean and unobtrusive as possible.

Older Chimneys and Inserts

Many established Port Moody homes have aging masonry fireplaces. A gas insert is often the most cost-effective way to bring that hearth back into use, but the existing chimney and liner need to be assessed first. We inspect the structure and recommend the correct liner and insert combination so the conversion is both safe and efficient.

Working With Your Utility

If your home is not already set up for natural gas, your gas utility handles the service connection to the property, and BC Wide takes care of the appliance side, including the connection from your gas supply to the fireplace. We will explain how the pieces fit together so there are no surprises.

Why Port Moody Homeowners Choose BC Wide

When you invite a contractor into your home for fuel-gas work, trust and proven experience matter. BC Wide Heating & Air Conditioning has served Greater Vancouver since 1999, and our reputation is built on careful, code-compliant workmanship rather than shortcuts.

  • Licensed BC technicians: Every gas fireplace installation is performed by qualified professionals, and we hold TSBC licence LGA90068.
  • Established local track record: More than two decades serving Greater Vancouver homeowners, with a 4.6-star rating across 160+ reviews.
  • Honest, no-pressure guidance: We recommend the fireplace and venting approach that fits your home and budget, and we explain the trade-offs clearly.
  • Free in-home quotes: Costs depend on the unit you choose, venting complexity, gas-line work, and finishing. Rather than quoting a misleading flat price online, we provide an accurate, written estimate after seeing your space.

If you are considering a new gas fireplace, a fireplace insert, or a built-in unit for your Port Moody home, the best first step is a conversation and an in-home assessment. Call BC Wide at 604-473-9690 or email info@bcwide.ca to book your free quote, and we will help you plan an installation that is safe, efficient, and built to last.

BC Wide Heating & Air Conditioning has served Greater Vancouver since 1999 with in-house, Technical Safety BC–licensed (gas contractor LGA90068) technicians — never subcontractors. Honest, up-front pricing before any work begins. Rated 4.7★ across 180+ verified Google reviews.

Frequently asked questions

Do I need a permit for a gas fireplace installation in Port Moody?

Gas fireplace installations involve fuel-gas and venting work that is regulated in British Columbia and generally requires the appropriate permits and a licensed contractor. BC Wide handles the installation to current code, and our technicians will explain the permitting and inspection requirements that apply to your specific Port Moody project during your free in-home assessment. We hold TSBC licence LGA90068.

How much does it cost to install a gas fireplace in Port Moody?

There is no single flat price because the cost depends on the fireplace model you select, the complexity of the venting run, whether new gas-line work is needed, and the finishing around the unit. Rather than quote an inaccurate figure online, BC Wide provides a free in-home assessment and a written estimate based on your home. Call 604-473-9690 to book a quote.

Can I convert my existing wood-burning fireplace to gas?

In many cases, yes. A gas insert can be fitted into an existing masonry firebox to convert it to clean, controllable gas heat, which is a popular upgrade in older Port Moody homes. The existing chimney and liner need to be assessed first to confirm the right insert and liner combination. A BC Wide technician can evaluate your fireplace and recommend the best approach.

Is a gas fireplace installation something I can do myself?

No. Gas fireplace installation involves combustion, sealed components, venting, and a fuel-gas connection, and improper work can create serious safety hazards and void manufacturer warranties. This work should always be completed by a licensed BC Wide technician who can ensure the unit is vented, connected, and commissioned correctly and safely.

Book service in Greater Vancouver

Call BC Wide Heating & Air Conditioning at 604-473-9690 or email info@bcwide.ca. Technical Safety BC–licensed (LGA90068), serving Metro Vancouver since 1999.

Gas Fireplace Installation Port Moody: what we check first

Before anyone talks about models or finishes, the installer has to answer a few practical questions in your home. Those answers decide whether the job is a simple one-day install or a larger project with framing, a new gas run and exterior work. Here is what a licensed gas fitter looks at on the first visit.

If you are replacing an older fireplace rather than adding a new one, tell us what it has been doing. Homeowners usually describe the problem in plain words, and those words point us toward the cause. The common ones we hear in Port Moody are listed below. Any one of them on an older unit is worth a look before you decide between repair and replacement.

  • Vent route: where a direct-vent pipe can exit the wall or roof while meeting the clearances the manufacturer and the gas code require from windows, doors, soffits, decks and neighbouring property.
  • Gas supply: whether the existing meter and piping can carry the fireplace alongside your furnace, water heater and range, or whether a new or larger line is needed.
  • Structure and finish: wall framing, combustible clearances, mantel height, hearth and whether a TV or shelving will sit above the unit.
  • Electrical: whether the fireplace needs a receptacle for a blower, fan or electronic ignition, and whether that outlet already exists nearby.
  • Approvals: strata rules for exterior terminations, and the permits that apply to your address.
  • Owner words we hear on old units: the pilot keeps going out, it clicks but will not light, the flame is tall and yellow or lazy, there is soot on the glass, it smells when it starts, the blower is loud, or it simply stopped heating the room.

How a gas fireplace installation in Port Moody works, step by step

A correct installation follows the same order every time, whether it is a direct-vent unit in a new framed chase or an insert going into an existing masonry fireplace. Most straightforward installs are finished on site in one to two working days, with the gas inspection scheduled separately. Larger jobs with new framing, drywall and tile take longer because finishing trades work in sequence. We offer same-day where we can for the estimate visit, but installation dates depend on the unit arriving and the permit being in place.

Step 1, in-home estimate: we measure the room, look at the vent route, check the gas meter and piping, and talk through how you want to use the fireplace, whether as everyday zone heat or for occasional evenings. The in-home estimate for a new installation or replacement is free.

Step 2, written quote: you should receive a quote that names the fireplace type, the venting method and termination location, the gas piping work, any electrical or framing included, the permit we will pull, what is excluded, and the manufacturer and workmanship warranty terms written out. If a quote does not say who pulls the gas permit, ask before you sign.

Step 3, sizing and selection: the unit is chosen for the room, not the showroom. A fireplace that is too large for a modern, well-sealed room will cycle off on its own limit or overheat the space, while an undersized one in an open-plan main floor will not keep up. Input and output ratings are manufacturer-published, so we confirm them for your specific model rather than guessing.

Step 4, permit: the gas permit is filed before the work starts. Where framing or exterior changes are involved, a building permit or strata approval may also be needed.

Step 5, install day: the gas line is run and pressure-tested, the vent is assembled and sealed to the manufacturer’s instructions, the unit is set and secured, and the termination cap is installed on the outside wall or roof.

Step 6, commissioning: we light the unit, check gas pressure, confirm the flame pattern and ignition, test the safety controls, check for leaks with the appliance running, and walk you through the remote, the wall switch and how to shut the gas off at the fireplace valve.

Step 7, handover: you receive the manual, the permit details, and the warranty registration is completed with the manufacturer. Many manufacturers require registration within a set period after installation, so we handle it rather than leaving it in a box.

Gas fireplace installation near me in Port Moody: neighbourhood and housing-type differences

Port Moody packs a lot of different housing into a small area, and the house type changes the installation more than the fireplace brand does. The notes below are general patterns we plan for. Every home is checked individually, because renovations and additions change what is behind the wall.

Heritage Woods: mostly larger detached homes on sloped lots. Many already have a gas fireplace that is now being replaced, so the work often centres on whether the existing vent and gas line suit a newer unit, and on reaching the termination safely on a hillside.

Moody Centre: a mix of older detached houses, character homes and newer townhouses and condos close to transit. Older houses here may have a wood-burning masonry fireplace that a homeowner wants to convert to a gas insert, which means inspecting the chimney and installing a liner sized to the insert.

College Park and Glenayre: established neighbourhoods where many homes date back several decades and have been renovated over time. We pay close attention to the age and capacity of the original gas piping and to whether the panel can take a new circuit if the unit needs one.

Ioco and Pleasantside: north shore areas with steep, treed lots and some waterfront exposure. Exterior terminations need protection from wind-driven rain, and access for running a vent or gas line can be the main labour factor.

Strata and townhomes: in condos and townhouses across the city, the strata corporation usually controls the exterior wall and roof, so a new vent penetration needs written approval before we book the install. Some buildings have bylaws on termination locations or require their own contractor documentation. Plan for that step early, because it often takes longer than the installation itself.

Repair or replace your gas fireplace in Port Moody?

A well-maintained gas fireplace can run for many years, so age alone does not decide it. We lean toward repair when the firebox, glass gasket, burner and venting are sound and the fault is a single component such as a thermocouple, thermopile, igniter, valve or blower. We lean toward replacement when parts for an older unit are no longer available, the firebox or heat exchanger is cracked or badly corroded, the venting does not meet current requirements, or you are paying for repeated repairs on a unit that still heats the room poorly.

An older standing-pilot fireplace also burns gas around the clock while the pilot is lit. Newer units commonly offer intermittent pilot ignition, which lights only when called for. That difference, along with better controls and fans, is often what tips owners toward replacing rather than repairing.

Brands we service for gas fireplaces include Regency, Napoleon, Valor, Mendota, Heat and Glo, Majestic, Montigo and Kingsman. BC Wide is an independent contractor, not a factory-authorized dealer for any of them, so our advice is about your house, not a sales target.

Owner-safe checks you may do before calling: confirm the wall switch and remote batteries, make sure the fireplace gas valve and the main gas supply are on, check that nothing is blocking the outside vent cap, and look for a tripped breaker if the unit has a blower or electronic ignition. Do not remove the glass front, adjust the gas valve, relight a pilot that keeps failing, or disconnect any gas fitting. Gas work in BC is restricted to licensed gas fitters, and new circuits are electrical work for a licensed electrician.

Gas and carbon monoxide safety: if you smell gas, do not operate switches or the fireplace, leave the house and call FortisBC or 911 from outside. Every home with a gas fireplace should have working carbon monoxide alarms on each level and near bedrooms. Soot on the glass, a yellow, lazy or lifting flame, or headaches and nausea when the fireplace is running are reasons to shut the unit off and have a licensed technician inspect it before it is used again.

Gas fireplace installation cost in Port Moody: ballpark ranges and what moves the price

The fireplace unit itself varies so much by type, size and finish that it is priced at the in-home estimate, but the gas supply is one part we can give a ballpark for. Running a new gas line to a fireplace is usually $500 to $1,500 when the run is short and accessible, and $1,500 to $3,000 or more when it is long, has to cross finished ceilings, or needs a larger main. These are ballpark figures for orientation only and are not a quote; an accurate price needs a site visit to your home.

What moves the total on a Port Moody fireplace job: the vent route and length, especially a roof termination on a steep or tall house; whether existing gas piping must be upsized; framing a new chase or bump-out; drywall, tile, stone and mantel finishing; adding a receptacle for a blower or ignition; chimney inspection and liner work on a wood-to-gas conversion; removal and disposal of an old unit; strata documentation; and any code upgrades found on site. Permit fees are set by each municipality or Technical Safety BC, and we include the permit work in the written quote.

Ask about rebates before you buy. Utility and government programs for fireplaces change and some only apply to specific efficiency levels, so check current eligibility before choosing a model and keep your invoice and permit paperwork, which programs usually ask for.

These are ballpark prices, not a quote. For exact pricing on your home, call BC Wide at (604) 473-9690 or email info@bcwide.ca.

Part of the jobBallpark, installed, before GSTWhat pushes it higher
New gas line, short and accessible run$500 to $1,500Distance from the meter, number of fittings, wall and floor access
New gas line, long or difficult run$1,500 to $3,000 or moreFinished ceilings, upsizing an undersized main, multi-storey runs
Fireplace unit, venting and installPriced at the in-home estimateUnit type and size, vent length, roof termination, steep lots
Framing, finishing and mantelPriced at the in-home estimateNew chase or bump-out, stone or tile, built-ins around the unit
Gas permit and inspectionSet by the municipality or Technical Safety BCAdditional building permit when structure or exterior changes

More questions homeowners ask

How much does gas fireplace installation cost in Port Moody?

It depends mostly on the unit type, the vent route, the gas line and the finishing work. The gas line is the one part with a dependable ballpark, shown in the table above, while the unit and finishing are priced after we see the room. For exact pricing, call (604) 473-9690 or email info@bcwide.ca to book a free in-home estimate.

Do I need a permit to install a gas fireplace in Port Moody BC?

Yes. Any new gas appliance and gas piping needs a gas permit filed by a licensed gas contractor, followed by an inspection. If the job adds framing or changes the exterior, a building permit and strata approval may also apply, and we tell you which ones at the estimate.

Can you install a gas fireplace in a Port Moody condo or townhouse?

Often, yes, as long as there is a gas supply and an approved place to terminate the vent. The strata usually has to approve the exterior penetration in writing before we book the work. Some buildings without gas service or with restrictive bylaws are not suitable, and we will tell you that honestly at the first visit.

Can I convert my wood-burning fireplace to gas in Port Moody?

In most cases, yes, with a gas insert vented through a liner installed in the existing chimney. The chimney has to be inspected first, and the liner is sized to the insert’s manufacturer instructions. If the chimney is damaged or the firebox is too small, a direct-vent unit in a new location may be the better route.

How long does gas fireplace installation take?

A straightforward install is usually finished in one to two working days on site, with the gas inspection scheduled afterward. Jobs with new framing, tile or stone and a mantel take longer because finishing is done in stages. We offer same-day where we can for estimates, and install dates depend on the unit and permit being ready.

Who is a licensed gas fireplace installation company near me in Port Moody?

BC Wide is a TSBC-licensed independent contractor, licence LGA0090068 and Class B gas licence CGA0028029, serving Metro Vancouver since 1999 and rated 4.7 stars from 181 Google reviews. Our licensed gas fitters pull the permit, give you a written quote before work starts and register your manufacturer warranty. Call (604) 473-9690 to book.

Related BC Wide services

4.7★181+ Google reviews
27+Years serving Greater Vancouver
20+Brands serviced
$0Free written estimates on installs

Frequently asked questions

What HVAC services does BC Wide offer in Metro Vancouver?
BC Wide installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses, condos with strata systems, and small commercial buildings.
How long has BC Wide been in business?
BC Wide Heating & Air Conditioning has been serving the Greater Vancouver area since 1999. Our TSBC-licensed technicians have built a reputation as some of the most experienced furnace, boiler and heat-pump specialists in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are BC Wide technicians licensed and insured?
Yes. BC Wide holds a TSBC gas-fitting licence, our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 473-9690, email info@bcwide.ca, or use the booking form on bcwide.ca. Most calls are answered the same business day and we offer next-day appointments for non-emergency work.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
Yes. We are a registered contractor for BC Hydro, FortisBC and federal Greener Homes rebates. A high-efficiency heat pump installation can qualify for up to $11,000 in combined rebates depending on your home and income.
How quickly can you replace a broken hot water tank?
Standard 40 or 50-gallon gas or electric tanks are typically replaced same-day or next-day from stock. Tankless water heaters and larger commercial units usually take 1–3 business days depending on parts availability.
Why should I choose BC Wide over other HVAC companies?
BC Wide Heating & Air Conditioning has been operating in Greater Vancouver since 1999 as a TSBC-licensed (LGA90068) HVAC and gas contractor. We specialise in furnaces, boilers, heat pumps and water heaters across every major brand, we give honest options instead of upselling, and our work is performed by experienced, certified staff — not subcontractors.

What Greater Vancouver homeowners say about BC Wide

Verified Google reviews — 4.7 average across 181+ ratings
★★★★★
"Alan and Mo were amazing today. They seamlessly replaced our furnace and tankless hot water tank in record time."
Mebz Esmail
Google review · Aug 2026
★★★★★
"Alan and his colleague are very friendly and professional. They installed everything and left it clean."
Laura E. Martínez Urrutia
Google review · Aug 2026
★★★★★
"I have been using BC Wide HVAC Services for over five years for my annual maintenance."
Thor Campbell
Google review · Aug 2026
★★★★★
"Excellent service from start to finish! B.C. Wide is knowledgeable, very professional and showed up on time! I highly recommend this company."
Mark Bouffard
Google review · Aug 2026
★★★★★
"I found these guys on Google. I just moved into a place where no maintenance has been done in the last 6 years."
Thomas Lee
Google review · Aug 2026
★★★★★
"Heat pump, furnace and tankless water heater installed. Competitive price. Careful, friendly, competent, efficient installation team. Professional appearing installation. Good company, highly recommended."
Thomas T
Google review · Jul 2026

Get a Free Quote — Right From This Page

Request a Free Quote

We'll call you back fast — usually within a few hours.
✓ Thanks! We've received your request and will call you back shortly.

Get Comfortable — Talk to BC Wide Today

Free, no-obligation quotes. TSBC-licensed local technicians serving Greater Vancouver since 1999.

Licensed & Insured: Technical Safety BC Licensed Gas Contractor LGA0090068  ·  Class B Gas Licence CGA0028029  ·  Red Seal Technicians  ·  Serving Greater Vancouver since 1999
🔥 Emergency Service(604) 473-9690
📞Call NowFast Response ✉️Email UsGet A Quote