★ 4.7 Google rating · Serving Greater Vancouver since 1999
ServicesBrandsRebates ReviewsAboutContact 📞 Call (604) 473-9690

How to Find Out if a Permit Was Pulled

Furnace

How to Find Out if a Permit Was Pulled
Home › How to Find Out if a Permit Was Pulled

How to Find Out if a Permit Was Pulled

Key takeaways

  • Furnace and gas work in British Columbia normally generates two separate paper trails: a municipal building or mechanical record and a provincial gas permit administered by Technical Safety BC.
  • As the registered owner of the property you can request records for your own address from both, and most homeowners find an answer within a couple of phone calls or online requests.
  • A missing record is not automatic proof that anything is wrong with the equipment, and it is not automatic proof that it is safe either. It means the question is still open.
  • The order that saves the most time is: confirm what is actually installed, search the municipal record, search the provincial gas permit record, then ask a licensed contractor to assess the installation itself.
  • Unpermitted gas work is a safety question before it is a paperwork question, so carbon monoxide alarms and a competent inspection come first.
  • The only honest fix is assessment and proper permitted correction. Nothing can be backdated, hidden, or quietly made to pass.

If you want to know whether a permit was pulled for a furnace or other gas work at your home, you check two places: the municipality the property sits in, which holds building and mechanical permit records tied to the civic address, and Technical Safety BC, which administers gas permits and the licensed contractors who pull them. You can request records for a property you own, and in most cases a search by address and approximate year of installation returns a clear answer. If nothing comes back, that is useful information rather than a verdict, because older records are sometimes incomplete, work is sometimes recorded under a different address format or a previous legal description, and some jobs genuinely were done without a permit. The next step in every one of those cases is the same: have the installation assessed by a licensed contractor so you know what you actually have, and then correct anything that needs correcting through the proper permitted process.

Which permits should exist for a furnace in the first place?

Understanding what you are searching for makes the search far quicker. A gas furnace replacement in British Columbia typically involves a gas permit, because connecting, altering or replacing gas-fired appliances and the piping that feeds them is regulated work that a licensed gas contractor takes responsibility for. Depending on the scope and the municipality, a building or mechanical permit may also be required, particularly when the work goes beyond a like-for-like swap into new venting through the building envelope, new ductwork, relocating the appliance, or structural and electrical changes.

That is why homeowners sometimes find one record and not the other and conclude something is missing when it is not. A straightforward furnace change-out in one municipality may generate a provincial gas permit and very little at city hall. A more involved project in another municipality may generate several records under different permit types, sometimes with separate records for gas, electrical and building work. Knowing which trades touched the job tells you which records to expect.

Venting deserves particular attention. A modern high-efficiency furnace vents differently than the older equipment it often replaces, usually through a sidewall rather than a masonry chimney, and that change frequently affects any remaining appliance sharing the old vent, such as a gas tank water heater. Where the venting arrangement changed, there was real regulated work done, and it should be traceable.

Where do permit records actually live in Metro Vancouver?

Records are split across two kinds of authority, and the split is the single most common source of confusion. Municipalities hold building, mechanical, plumbing and in some cases electrical permit records for properties inside their boundaries. Technical Safety BC administers the provincial regulated-work system, which is where gas permits and licensed gas contractors sit, and it maintains records of permits taken out and inspections performed under that system.

Every municipality runs its own process, its own record-keeping conventions and its own rules about what it will release and to whom. Some have online property or permit lookups. Some take a written records request. Some ask you to attend in person with identification proving you are the owner. Do not assume any particular process, fee structure, form name or turnaround time applies to your city, because these genuinely differ across the region and they change. Ask your own municipality directly and take them at their word rather than mine.

The same caution applies provincially. Technical Safety BC is the correct authority to ask about gas permits and about the licensing status of a contractor, and their staff can tell you what they hold and what they can release for a given address or permit number. Confirm the current process with them rather than relying on any secondhand summary, including this page.

What you are trying to confirmWho normally holds itWhat to have ready
A gas permit was taken out for the furnaceTechnical Safety BCCivic address, approximate year, contractor name if known
A building or mechanical permit existsYour municipalityCivic address, legal description, approximate year, owner identification
The contractor was licensed at the timeTechnical Safety BCContractor or company name, licence number if it appears on any invoice
Electrical work was permittedMunicipality or Technical Safety BC depending on jurisdictionAddress, year, scope of the electrical change
An inspection happened and what it foundThe authority that issued the permitPermit number once you have it
What equipment is actually installedThe appliance itself and its data platePhotographs of the rating plate, model and serial number

What order should I do this in so I do not waste time?

Start with the appliance, not the filing cabinet. Go to the furnace and photograph the rating plate, which carries the manufacturer, model and serial number. The serial number usually lets the manufacturer or an installer establish roughly when the unit was built, which narrows the window you are searching. Searching a record system for the wrong decade is the most common reason a search comes back empty.

Then search the municipal record for the address, using the widest date window you can. Then ask Technical Safety BC about gas permits for that address in the same window. If you have any invoice, receipt, warranty registration or home-inspection report from the era, bring the contractor’s name along, because searching by contractor sometimes surfaces a record that an address search missed due to a typographical difference in how the address was entered.

Only after you have exhausted the records is it worth speculating about what happened. The assessment of the physical installation can run in parallel with any of this and often answers the practical question faster than the paperwork does.

  • Photograph the rating plate, model number and serial number on the furnace.
  • Check the appliance and nearby ductwork for any inspection sticker, tag or contractor label.
  • Search your own conveyancing file: the property disclosure statement, home inspection report and any receipts from previous owners.
  • Request municipal permit records for the address across a generous date range.
  • Ask Technical Safety BC about gas permits for the address and, if you have it, the contractor.
  • Book a licensed contractor to assess the installation itself while you wait on the records.

What does it mean if no permit record turns up?

It means the question is unresolved, and that is genuinely all it means at that stage. There are several ordinary explanations. Record systems were not always digital, and older paper files are not uniformly complete or uniformly searchable. Addresses get recorded inconsistently, especially on properties that have been subdivided, renumbered or converted. A permit may exist under a legal description rather than the civic address you searched. And sometimes, yes, the work was done without a permit.

What a records gap does not tell you is whether the installation is safe, correct, or acceptable. A permitted job can still have defects that developed later. An unpermitted job is not automatically dangerous, although it has never been verified by anyone independent, which is precisely the problem. Treat the absence of a record as a reason to look at the equipment properly, not as a conclusion about it.

Resist the urge to characterise whoever did the work. You almost never know who it was, what they were told, what the rules were at the time, or whether a permit was taken out and simply never closed. Assigning blame adds nothing to the decision in front of you, which is what to do now.

Why is this coming up for Metro Vancouver homeowners so often?

Our housing stock is the reason. Large parts of Metro Vancouver were built out in eras when a mid-efficiency gas furnace vented into a masonry chimney and a single-storey bungalow had one heating zone and modest ductwork. Those houses have since been renovated, suited, re-clad, and re-heated, often more than once, and each of those rounds of work may or may not have generated records that survive in a searchable form today.

Strata density adds a second layer. In a townhouse or a condominium, the appliance may sit inside your unit while the venting, the gas line and the common property it passes through are governed by the strata corporation as well as by the municipality. A strata may hold its own records of approvals, alterations and contractor work, and an alteration agreement in the strata’s files is sometimes the document that fills in a gap the city record cannot.

Our mild coastal climate matters too, in a quiet way. Heating seasons here are long but rarely severe, so a marginal installation can run for years without ever being pushed hard enough to reveal itself. A furnace that has heated a house through fifteen damp Lower Mainland winters without complaint has not proved that its venting or gas piping is correct. It has only proved that nothing has gone visibly wrong yet.

Finally, transactions surface these questions. Buyers, realtors, insurers, lenders and strata councils all ask about permits, and they ask at the least convenient moment. That pressure is real, but it does not change the answer: find out what is installed, find out what is on record, and put right whatever needs putting right.

What does a licensed contractor’s assessment actually tell me?

A licensed gas contractor assessing a furnace installation is answering a different question than the records search. The records tell you whether anyone signed their name to the work. The assessment tells you whether the work itself is right, and that is usually the answer that matters to a buyer, an insurer or a strata.

A proper assessment looks at the appliance and its condition, the venting arrangement and its terminations and clearances, the combustion air supply, the gas piping and its sizing and support, the condensate handling on a high-efficiency unit, the electrical connections and bonding, the clearances to combustibles around the appliance, the ductwork and return-air arrangement, and the controls. It also looks at whether any other gas appliance in the house was affected by the furnace change, which is a frequent finding on older homes where a water heater was left orphaned on a chimney sized for two appliances.

What you get at the end is a written description of what is installed, what does not meet current requirements, what is a safety concern as opposed to a documentation concern, and what the correction would involve. That written assessment is what turns a vague worry into a scope of work. Ask for a written quote for any correction rather than a verbal figure, and expect the permitting path to be part of that scope rather than an afterthought.

  • Confirmation of what equipment is actually installed, from the rating plate rather than from assumption.
  • An inspection of venting, combustion air, gas piping, condensate and electrical connections.
  • A check on whether other gas appliances were affected by the furnace installation.
  • A plain description of which findings are safety issues and which are compliance or documentation issues.
  • A scope of work for correction, with permitting included in the plan and a written quote.

What do I do about work that really was unpermitted?

You have it assessed, you find out what it needs, and you have it corrected properly and permitted. That is the whole of the honest path, and there is no version of this where the right answer is to conceal, backdate, paper over or quietly hope. Nobody can retroactively make an unpermitted installation permitted without the work being brought up to standard and inspected, and anyone suggesting otherwise is offering you a liability, not a solution.

The practical shape of it is usually less dramatic than homeowners fear. In many cases the installation is fundamentally sound and the correction is limited and specific: a venting detail, a gas-piping support or sizing issue, a clearance, a condensate termination, an orphaned water heater. The corrective work is scoped, a licensed contractor takes out the permit in their own name and carries responsibility for the work, the work is done, and it is inspected. At the end you hold documentation you did not have before, which is exactly what the buyer, insurer or strata was asking for.

On the questions this page cannot answer, go to the people who can. Whether a particular insurance policy responds to a particular loss is a question for your insurer or broker with the policy in front of them, and no contractor should be telling you what your insurer will or will not do. Whether a disclosure obligation applies to your sale is a question for your lawyer or notary. Whether your municipality will require anything further is a question for your municipality. This page is general information, not legal advice, and not a ruling from any authority.

Tell the truth as you go. Disclosing that you found an undocumented installation, had it assessed and had it corrected under permit is a far stronger position than any attempt to leave the question fuzzy, and it tends to end the conversation rather than prolong it.

When should I call a licensed technician?

Call immediately, before any records search, if you have any symptom that points at combustion or gas. That includes the smell of gas, soot or scorching around the furnace or vent, a yellow or unstable burner flame where it should be blue and steady, a carbon monoxide alarm that has sounded, condensation or staining on nearby surfaces, or anyone in the household experiencing headaches, nausea or drowsiness that improves when they leave the house. None of that waits for paperwork.

Call in the ordinary course when you have been asked a permit question and want the installation assessed, when a records search has come back empty, when a home inspection has flagged the furnace or its venting, when a strata or insurer wants a professional opinion, or when you are planning to sell and would rather know now than during a subject-removal period.

A homeowner may reasonably photograph the rating plate, change the filter, check that supply and return grilles are unobstructed, test carbon monoxide and smoke alarms, and gather the paperwork. A homeowner may not alter, repair or connect gas piping or gas appliances, and most electrical work is likewise restricted to licensed trades in British Columbia. Those limits exist for exactly the reason this page is about.

BC Wide Home Services Ltd has been serving Metro Vancouver from Burnaby since 1999 as an independent TSBC-licensed contractor, licences LGA0090068 and CGA0028029. We are not a factory-authorised dealer for any manufacturer, and we service equipment from many brands rather than representing one. If you want an installation looked at and documented honestly, call (604) 473-9690. Same-day attendance is sometimes possible and sometimes is not, depending on the day and the call volume, and we will tell you straight rather than promise an arrival window we cannot keep.

Gas & carbon-monoxide safety: Unpermitted gas work is a safety question before it is a paperwork question. If you smell gas, leave the building immediately, do not operate light switches, garage doors, phones or anything else electrical inside, and call for help from outside once you are clear of the building. Carbon monoxide is odourless and cannot be detected by smell: fit working CO alarms on every level of the home and outside sleeping areas, test them, and replace them at the end of their service life. If a CO alarm sounds, get everyone outside into fresh air and call from outside. Soot, scorching, a persistently yellow burner flame, unexplained moisture near the appliance, or headaches and nausea that ease when people leave the house are all reasons to stop using the appliance and have it inspected. In British Columbia, gas work and most electrical work may only be carried out by appropriately licensed trades, and refrigerant handling is legally restricted to certified technicians. Do not attempt to inspect, alter or correct gas piping, venting or appliance connections yourself.

Frequently asked questions

Can I look up a permit for my own house myself?

Yes, as the registered owner you can request records for your own property. Municipalities hold building and mechanical permit records and set their own process for releasing them, and Technical Safety BC holds provincial gas permit records. Contact each directly with your civic address and an approximate year, and ask them what they can provide and how.

Does no permit record mean the furnace is unsafe?

No. It means nobody independent has verified the installation, which is not the same as the installation being defective. Older records are sometimes incomplete or indexed under a different address format, so a blank search is not proof either way. The only way to know the condition of the installation is to have a licensed contractor assess it.

How far back do permit records go?

It varies by authority and by era, and it is genuinely inconsistent across the region. Recent decades are usually searchable electronically, while older work may sit in paper files with less complete indexing. Ask the municipality and Technical Safety BC what they hold for the period you are interested in rather than assuming a cut-off.

My buyer is asking about a permit and we are on a deadline. What is the fastest path?

Run the records request and book the assessment at the same time rather than in sequence. The assessment often answers the buyer’s underlying question, which is whether the installation is sound, faster than the records do. Then disclose honestly what you found and what you are doing about it.

Can unpermitted work be permitted after the fact?

Not by paperwork alone. The path is to have the installation assessed, have any deficiencies corrected by a licensed contractor who takes out the permit in their own name, and have the work inspected. Nothing can be backdated or made to pass without being brought up to standard, and you should be wary of anyone who implies otherwise.

Does my strata need to be involved?

Often yes, in a townhouse or condominium, because venting, gas piping and the assemblies they pass through frequently involve common property. Your strata may also hold alteration records that fill a gap in the municipal file. Ask the strata manager what is on file for your unit and what approval any corrective work would require.

Will my insurance be affected if the work was unpermitted?

That is a question for your insurer or broker with your actual policy in front of them, and no contractor can answer it for you. What we can tell you is that a written professional assessment and a properly permitted correction are the documentation that these conversations tend to ask for. Get the facts about the installation first, then take them to your insurer.

What should I have ready before I call about an assessment?

Photographs of the furnace rating plate showing model and serial number, any paperwork you inherited or kept, the approximate age of the equipment if you know it, and a note of any other gas appliances in the home such as a water heater or fireplace. If a home inspection flagged something, have that report handy. Call (604) 473-9690 and we will tell you what an assessment would cover.

BC Wide Home Services — Lower Mainland home-comfort specialists since 1999

Technical Safety BC Licensed Gas Contractor (LGA0090068) · Class B Gas Licence (CGA0028029) · Red Seal technicians · Evening and weekend calls · Diagnostic service calls $189.00 · Free in-home estimates on replacements (the $189.00 is waived if you replace with us). Call 604-473-9690 or book a free replacement estimate.

4.7★181+ Google reviews
27+Years serving Greater Vancouver
20+Brands serviced
$0Free written estimates on installs

Frequently asked questions

What HVAC services does BC Wide offer in Metro Vancouver?
BC Wide installs, services and repairs boilers, furnaces, heat pumps, hot water tanks, tankless water heaters, gas fireplaces and air conditioning across Metro Vancouver. We work on residential homes, townhouses, condos with strata systems, and small commercial buildings.
How long has BC Wide been in business?
BC Wide Heating & Air Conditioning has been serving the Greater Vancouver area since 1999. Our TSBC-licensed technicians have built a reputation as some of the most experienced furnace, boiler and heat-pump specialists in the Lower Mainland.
What areas do you serve?
We cover all of Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, White Rock, Pitt Meadows, and Maple Ridge.
Are BC Wide technicians licensed and insured?
Yes. BC Wide holds a TSBC gas-fitting licence, our technicians are Red Seal certified for HVAC and gas, and we carry full liability insurance and WorkSafeBC coverage.
How can I book a service call?
Call (604) 473-9690, email info@bcwide.ca, or use the booking form on bcwide.ca. Most calls are answered the same business day and we offer next-day appointments for non-emergency work.
Do you offer free estimates?
Yes. Free in-home estimates are provided for boiler, furnace, heat pump and water-heater replacements. Diagnostic visits for repairs carry a flat service fee that is credited toward the repair if you proceed.
What brands do you service?
We service all major brands including Viessmann, Navien, IBC, Rinnai, Rheem, Bradford White, Weil-McLain, Laars, Baxi, NTI, Lennox, Carrier, Bryant, Goodman, Trane, York, Daikin, Mitsubishi Electric, AO Smith, Bosch, Noritz, Giant, GSW, John Wood, and Valor.
Do you offer government rebates for heat pumps?
Yes. We are a registered contractor for BC Hydro, FortisBC and federal Greener Homes rebates. A high-efficiency heat pump installation can qualify for up to $11,000 in combined rebates depending on your home and income.
How quickly can you replace a broken hot water tank?
Standard 40 or 50-gallon gas or electric tanks are typically replaced same-day or next-day from stock. Tankless water heaters and larger commercial units usually take 1–3 business days depending on parts availability.
Why should I choose BC Wide over other HVAC companies?
BC Wide Heating & Air Conditioning has been operating in Greater Vancouver since 1999 as a TSBC-licensed (LGA90068) HVAC and gas contractor. We specialise in furnaces, boilers, heat pumps and water heaters across every major brand, we give honest options instead of upselling, and our work is performed by experienced, certified staff — not subcontractors.

What Greater Vancouver homeowners say about BC Wide

Verified Google reviews — 4.7 average across 181+ ratings
★★★★★
"Alan and Mo were amazing today. They seamlessly replaced our furnace and tankless hot water tank in record time."
Mebz Esmail
Google review · Aug 2026
★★★★★
"Alan and his colleague are very friendly and professional. They installed everything and left it clean."
Laura E. Martínez Urrutia
Google review · Aug 2026
★★★★★
"I have been using BC Wide HVAC Services for over five years for my annual maintenance."
Thor Campbell
Google review · Aug 2026
★★★★★
"Excellent service from start to finish! B.C. Wide is knowledgeable, very professional and showed up on time! I highly recommend this company."
Mark Bouffard
Google review · Aug 2026
★★★★★
"I found these guys on Google. I just moved into a place where no maintenance has been done in the last 6 years."
Thomas Lee
Google review · Aug 2026
★★★★★
"Heat pump, furnace and tankless water heater installed. Competitive price. Careful, friendly, competent, efficient installation team. Professional appearing installation. Good company, highly recommended."
Thomas T
Google review · Jul 2026

Get a Free Quote — Right From This Page

Request a Free Quote

We'll call you back fast — usually within a few hours.
✓ Thanks! We've received your request and will call you back shortly.

Get Comfortable — Talk to BC Wide Today

Free, no-obligation quotes. TSBC-licensed local technicians serving Greater Vancouver since 1999.

Licensed & Insured: Technical Safety BC Licensed Gas Contractor LGA0090068  ·  Class B Gas Licence CGA0028029  ·  Red Seal Technicians  ·  Serving Greater Vancouver since 1999
🔥 Emergency Service(604) 473-9690
📞Call NowFast Response ✉️Email UsGet A Quote