A cracked heat exchanger on a KeepRite furnace is a safety finding. Here is what the part does, why it must be a model-matched replacement, what an owner can safely check, and how to decide between replacing the exchanger and replacing the furnace.


BC Wide installs, repairs and maintains furnaces for homes across Greater Vancouver — licensed, insured and trusted since 1999. Free written quotes and full rebate help.
From a no-heat emergency to a full high-efficiency upgrade, BC Wide does it all.
TSBC gas licence LGA90068, Red Seal technicians, WorkSafeBC covered.
25+ years serving Burnaby, Vancouver & the Lower Mainland.
Our own staff service furnaces — permitted & inspected to BC code.
We help you claim BC Hydro, FortisBC & federal rebates.
We install and repair every major brand — explore by name.
Annual servicing is recommended for gas furnaces, ideally before the start of the heating season in September or October. Service includes burner cleaning, heat exchanger inspection, ignition check, blower motor cleaning, gas pressure adjustment and a full safety test for carbon-monoxide leaks.
High-efficiency gas furnaces typically last 15–20 years with annual maintenance. Vancouver's mild climate means lower run-times than colder Canadian cities, which extends life — but salt-air corrosion near the coast and high humidity can shorten it.
Common causes are a thermostat set to "on" instead of "auto", a tripped flame sensor, a clogged condensate drain shutting down a high-efficiency unit, low gas pressure, or a failed ignitor. Most are repairable in a single service visit.
A typical residential high-efficiency gas furnace in Metro Vancouver costs $4,500–$8,500 installed depending on size, brand and venting requirements. Variable-speed and modulating models are at the upper end.
In our experience servicing Vancouver homes since 1999, Carrier, Lennox, Bryant and York have produced the most reliable mid-to-high-efficiency furnaces with the best parts availability. Goodman and Rheem offer strong value at lower price points.
Free, no-obligation quotes. TSBC-licensed local technicians serving Greater Vancouver since 1999.
Helpful articles from our technicians.

A cracked heat exchanger on a KeepRite furnace is a safety finding. Here is what the part does, why it must be a model-matched replacement, what an owner can safely check, and how to decide between replacing the exchanger and replacing the furnace.

A tripped rollout switch on a KeepRite gas furnace is a combustion safety warning. Here is what the switch does, what you can safely check, why the cause must be found before the part is replaced, and what a licensed replacement visit involves in Metro Vancouver.