AC Installation in Burnaby
Burnaby is BC Wide Heating & Air Conditioning‘s home base, and it is where we have installed cooling systems since 1999. From the high-rises of Metrotown and Brentwood to the established homes of Burnaby Heights, Capitol Hill and the Buckingham area, we size and install air conditioning that fits the home, the budget and BC’s climate. This guide walks through your options, what proper installation involves, and the rebates available to Burnaby homeowners.
Choosing the Right System for Your Burnaby Home
The best cooling system depends on your home’s layout and whether it already has ductwork. We install three main types:
- Central air conditioning: Ideal for homes that already have a forced-air furnace and ducting, common in detached houses around Government Road, Sperling and Montecito. The condenser sits outside and cools the whole home through existing ducts.
- Ductless mini-splits: Perfect for homes without ducts, additions, suites and the many condos in Metrotown, Brentwood and Lougheed. Each indoor head is zoned, so you cool only the rooms you use.
- Heat pumps: The most popular choice today. A heat pump cools in summer and heats efficiently in our mild winters, and it qualifies for the largest rebates. Available in both ducted and ductless forms.
Because Burnaby spans dense towers and hillside detached homes, getting the system type and size right is the single most important decision. An oversized unit short-cycles and humidifies poorly; an undersized one runs constantly and never quite keeps up.
System Comparison
| System | Best for | Heating too? | Typical installed cost (CAD) |
|---|---|---|---|
| Central AC | Homes with existing ducts | No (cooling only) | $5,000 – $9,000 |
| Ductless mini-split (single zone) | One room, suite or condo | Yes, with heat pump head | $4,000 – $7,000 |
| Ductless multi-zone | Whole home without ducts | Yes | $9,000 – $18,000 |
| Ducted heat pump | Whole home with ducts | Yes | $8,000 – $16,000 |
These are general ranges for the Lower Mainland. Your final price depends on capacity, the number of zones, electrical upgrades and the condition of any existing ductwork.
What a Proper Installation Involves
A good install is about more than bolting in equipment. Our process includes a load calculation to size the system to your home, careful placement of the outdoor unit for airflow and noise, correct refrigerant line sizing and evacuation, electrical and condensate connections to code, and a full commissioning test. We pull the required permits and, as a TSBC-licensed contractor (LGA0090068), we ensure the gas and electrical work meets BC standards. We also walk you through your new thermostat and maintenance so the system delivers its rated efficiency for years.
BC Rebates for Burnaby Homeowners
Heat pumps qualify for meaningful incentives in BC. Depending on the program and your situation, rebates may be available through CleanBC Better Homes and through BC Hydro, and additional municipal or federal support sometimes applies. These programs change over time and have eligibility rules, so we help Burnaby homeowners identify what they qualify for and design an installation that meets the requirements. Choosing a heat pump can offset a large share of the upfront cost while lowering your year-round energy bills.
Why Choose BC Wide in Burnaby
- Burnaby-based and serving the Lower Mainland since 1999
- TSBC-licensed (LGA0090068) with a 4.9-star Google rating
- Proper load sizing, not guesswork, on every install
- Help navigating rebates and permits from start to finish
How Long Does Installation Take?
For most Burnaby homes, a straightforward installation is completed in one day. A single-zone ductless system often takes a half-day, while a multi-zone ductless or a ducted heat pump can run one to two days depending on electrical work and duct modifications. Condo installs in Metrotown or Brentwood sometimes take a little longer because of building access, elevator booking and strata requirements. We give you a realistic timeline before we start and keep the work area clean throughout.
Sizing and Efficiency Matter
The number you will see on equipment is its capacity in tons or BTUs and its efficiency rating, shown as SEER2 for cooling and HSPF2 for heat pump heating. Higher ratings mean lower running costs, and many rebate programs set a minimum efficiency to qualify. Rather than steering you toward the most expensive unit, we match capacity to your home’s actual heat load and recommend an efficiency tier that balances upfront cost, your hydro bills and rebate eligibility. In Burnaby’s climate, a right-sized, properly commissioned mid-to-high-efficiency heat pump usually delivers the best long-term value.
Maintaining Your New System
A new system protects its warranty and efficiency only if it is looked after. We recommend changing filters regularly, keeping the outdoor unit clear, and booking an annual tune-up. Most manufacturers require proof of professional maintenance to honour the full parts warranty, so an annual visit pays for itself if a major component ever needs covering. We can set you up on a simple maintenance schedule when we hand over your new system.
Book Your AC Installation in Burnaby
Whether you are in a Metrotown condo, a Capitol Hill character home or a new build near Lougheed, BC Wide provides expert AC installation along with repair and same-day, after-hours service and fast emergency response across Greater Vancouver. Call BC Wide at (604) 473-9690 for a straightforward quote on cooling your Burnaby home.
Frequently asked questions
Do I need air conditioning in Vancouver?
How much does central A/C cost in Vancouver?
How often should A/C be serviced?
What HVAC services does BC Wide offer in Metro Vancouver?
How long has BC Wide been in business?
What areas do you serve?
What Greater Vancouver homeowners say about BC Wide
Get a Free Quote — Right From This Page
Request a Free Quote
Get Comfortable — Talk to BC Wide Today
Free, no-obligation quotes. TSBC-licensed local technicians serving Greater Vancouver since 1999.


